Sorry it’s been so long since I’ve posted, but I’ve been very busy at work, and the fire station seems to be taking more and more of my time!
Part one. Building the basics.
I’ve started to prepare for the first of two shows. I’ve decided to build the Low Relief High Street (T005) from scalescenes . This is the first low relief project I have done. For those of you that may not know, low relief is building only the front or the back of the building because you don’t see behind, and is usually located at the edge of the layout.
It’s been a straight forward start to the build, as it is modular and I have started builds like this before.
The individual elements fit together to form the High Street. There are five shops in total, three small shops and two larger shops. I haven’t decided what the three smaller shops are to be yet, but the two larger ones are to be a Department Store and the other a Bank.
As I have said before, the reason I like these kits is the detail. From a washed out and faded gable end…..
….to interior doors and drain pipes.
Now that main section of the High Street is together, I can set to and make the façades. I must admit that this is one of the parts of the project that really find rewarding. The character of the build grows from hear. I had eight different façades to choose from and this is three I choose for the smaller buildings.
Some fiddly cutting out required, but the results speak for themselves….
As you can see from the previous picture there is some quite small detail, and as I have said previously I have fingers like “Pork Sausages” but this is where my tweezers come into play…..
That all I have to show you for now, as I need to get on and get this finished for the first of the two shows. I promise it will not be as long until the next time……