Coaling Stage………..

Since sitting back at my craft table a few weeks ago, it’s been none stop. I had forgotten just how relaxing it was to sit at the end of a busy day and put a model together. So much so, I’ve cracked on and finished another one in record time. I had a go at the R026 Coaling Stage from Scalescenes. This was a 2013 release that I’ve always wanted a crack at. So here we go.

I liked this build, as it involved cutting out nice big pieces for a change. Saying that, it takes nothing from its detail. Nice big panels laminated together with the addition of extra buttress pieces.

     

Once the cover layers are put in place and wrapped around all relevant raw edges, you know it’s starting to take shape.

     

More lamination of the 2mm cardstock to produce a quite substantial element, and when wrapped with its cover layer, it makes a very hefty buttress.

     

The front of the Coaling Stage has the most detail. And it’s at this stage I can’t help myself. The window openings raw edge is covered by a simple window sill cover.

     

The windows themselves are printed onto OHP (Over Head Projector) film and added to the back of the front exterior wall.

     

Now at this stage, I’m sorry but I have to become a bit OCD. Once you put the interior wall over the back of the exterior wall, all well and good. Not. I know that you can’t see the interior wall behind the window but, I know that there is a raw edge. So I have to colour the raw edge. I know it’ll never be seen, but it has to be done.

Bring all of the walls together nice and square and add the floor. Which cleverly adds the loading ramp at the same time.

     

Add the side walls and roof to the loading ramp. More detail gets added at a later stage. I didn’t want to put it on at this stage just in case it was knocked off.

The raw corners are covered by simple corner pieces wrapped with a brick cover layer.

     

The floor looked a little bare to me, so I thought I’d have a bash at making some coal. I had some blocks of polystyrene blocks lying around, so I set to and fashioned a couple of piles of coal. Gave them a quick coat of black paint, and hey presto, piles of coal. I know the coal nuggets are a little big, but I’m from an old mining village and trust me, I’ve seen coal that big, honest.

     

     

At this stage I wasn’t happy with the floor so, whilst at work I showed one of my colleagues a picture of the floor. At the time we were discharging a vessel at the docks with 3971 tonnes of Pet Coke. So we decided to “borrow” a teaspoon full. I painted pva glue on the floor and sprinkled on the Pet Coke. Real coal! I’m happy with the result now. Shame it won’t be seen again.

As you can see from the previous picture, the period between no coal and coal, I fit the roof support and joists.

     

Again, at this point, I got carried away and forgot to take pictures of the making of the cornice and the water tank. The cornice is constructed by layering three progressively larger squares of card with the edges wrapped with brick. Once stacked on top of each other, it gives a impressive cornice. The water tank is just a square box with supports for the roof. The panels are individually stuck on to give definition and depth.

     

The roof of the tank is made with one piece of card. Heavily scored to achieve a gentle curve. Then covered with the roof print.

     

You’ll notice there’s a notch cut out of the corner. this wasn’t a slip of the knife, it’s for the inspection hatch.

A couple of dust screens came next. A bit fiddly for me with my huge fingers, but a fine bit of detail. Well worth the effort.

     

Construction of the stairwell next. Sore fingers at the end of this stage. But an easy way to make sturdy stairs.

 

And that was it. A quick week of a very enjoyable build.

     

     

     

I’ve got a ladder to source from somewhere for access to the inspection hatch. Thank goodness for the internet. I’m pleased with this one. A nice big chunky build but with fine detail. And with the hidden coal store inside. I like this one.

Next, I think I’m going to try and revisit the model that I never finished. It’s a model that I had to put in the bin as it evoked painful memories of my late Brother. I was building it when he passed away, and from that day I couldn’t bring myself to finish it. Now that I’m enjoying building again, I think it’s time it got made and showed you it in all its glory.

Until Next Time…………

Air Brushing…………….

After building my last project, my wife Jak past comment, that everything looked great but a little clean and clinical. She suggested that it may look better if I “made it distressed” and I had to agree, but where to start? I have at my disposal, a vast array of Promarkers but I’m not too confident at colouring in. So, she suggested I had a go at air brushing. She has an air brushing system but it takes some setting up. So she contacted one of her crafting friends at Perfect Paper Crafting. She very kindly sent me “The Perfect Airbrush” a hand operated air brush to go with my Promarkers. To be honest, I’ve had a ball. It’s so easy to operate and control single handed. If I wasn’t careful, I could of totally air brushed all of my models. But I think that might of been a bit too much.

     

     

And here are some of the results I managed to achieve.

Before…

……..and after. I’m quite proud of my efforts.

     

So,from now on, with my new Air Brush and my collection of Promarkers

The sky is the limit.

Until Next Time…………..

Industrial Workshop and Water Tower……………….

Well I’ve cracked on at a fair old pace with this project. So much so, I’ve finished it. It is the T024a Industrial Warehouse from Scalescenes, but I’ve had sneaky access to the next releases, the Boiler House B, the Workshop C and the Water Tower D. All of the buildings are typical Scalescenes. Simple but sturdy, highly detailed box construction. The Workshop was so simple, it only took two nights after work to complete. Unfortunately I’ve no pictures of the build, as it was put together so quick, but its nothing I’ve shown in previous posts. But here it is in its finished state.

     

With just the Water tower to build, it was coming on a treat. It’s a simple sturdy box, with very clever detailed exterior walls, built up in layers.

     

         

Simply glued together to make the box. The back wall, which is visible through the window, has detailed print. With the addition of a simple pipe running from top to bottom. this is simply made by rolling the paper on itself to form a tube and gluing.

     

Corners come next. These too add extra detail and depth to the tower.

     

As you can see, that when it all comes together how strong and sturdy it becomes.

The water tank is next. A simple box with added detail to give the look of a panelled tank.

     

With the addition of the roof, that’s it. I like this one.

     

When all brought together it makes quite a statement.

     

     

     

      

I now intend to add some of my own detail to this complex. I’ve acquired a hand operated airbrush that works with my vast Promarker collection. It’s my intention to try and “dirty up” this build. I’ll let you know how I get on.

Until Next Time………….